What acceleration and jerk settings are people using?

Discussion in 'OpenBeam Kossel Reprap and OpenBeam Kossel Pro' started by Matt, Sep 7, 2016.

  1. Matt

    Matt New Member

    Trying to dial in accel and jerk settings so the kossel pro doesnt shake itself apart, what are the settings that other people are using succsesfully?
  2. grainiac

    grainiac Active Member

    With my Azteeg X5 mini I use the following settings:

    # Planner module configuration : Look-ahead and acceleration configuration
    # ---------------------------------------------------------------------
    acceleration 2400 # Acceleration in mm/second/second.
    acceleration_ticks_per_second 1000 # Number of times per second the speed is updated
    planner_queue_size 32 # DO NOT CHANGE THIS UNLESS YOU KNOW EXACTLY WHAT YOUR ARE DOING
    junction_deviation 0.01 # Similar to the old "max_jerk", in millimeters, see : https://github.com/grbl/grbl/blob/master/planner.c#L409

    Full config file is available here:
    https://github.com/grainiac/3D_Printing/blob/master/OpenBeamKosselPro_Azteeg_X5_Mini_Config/config

Share This Page